Two Stroke Petrol Engine Working Principle Parts Types Function

 

Two Stroke Petrol Engine Working Principle Parts Types Function

A two stroke engine is a type of internal combustion engine which completes a power cycle with two strokes of the piston during only one crankshaft revolution.

In four stroke engines, there is one working stroke in two revolutions of the crankshaft. The desire of one working stroke in every revolution of the crankshaft has led to the development of two stroke engine.

In 1838, Barnett, an Englishman, described the mechanism for supplying a charge to the cylinder by means of separate pumps. In 1878, Dugald Clerk has also made a lot of contribution in this direction and described a two stroke cycle known as Clerk Cycle.

Two stroke engine gif

The two-stroke engine are employed for small powers required in autocycles, scooters, motorcycles.

 In two-stroke engines, there is no suction and exhaust strokes.

There are only two remaining strokes the compression stroke and power stroke. These are usually called the upward stroke and downward stroke.

& also, instead of valves, there are inlet and exhaust ports in two-stroke engines.

Fresh charge enters the cylinder at the end of the working stroke through the inlet port. And then burnt exhaust gases are forced out through the exhaust port by a fresh charge.

Two strokes Spark Ignition (Petrol) Engine.

The working principle of two stroke spark ignition engine is shown in the figure below. Its two strokes are :

  1. Upward Stroke
  2. Downward Stroke

1. Upward Stroke

During upward stroke, the piston moves upward from the bottom dead centre to top dead centre. By compressing the charge air-petrol mixture in the combustion chamber of the cylinder. Due to upward movement of the piston, a partial vacuum is created in the crankcase.

Two-stroke-engine

And a new charge is drawn into the crankcase through the uncovered inlet port. The exhaust port and transfer port are covered when the piston is at the top dead centre position. The compressed charge is ignited in the combustion chamber by a spark given by the spark plug.

2.Downward Stroke

As soon as the charge is ignited the hot gases compress the piston which moves downward, rotating the crankshaft , doing the useful work.

During this stroke, the inlet port is covered by the piston and the new charge is compressed in the crankcase. Further downward movement of the piston uncovers first the exhaust port and then the transfer port & hence the exhaust starts through the exhaust port.

As soon as transfer port is open, the charge through it is forced into the cylinder. The charge strikes the deflector on the piston crown, rises to the top of the cylinder and pushes out most of the exhaust gases. The piston is now at the bottom dead centre position.

The cylinder is completely filled with a fresh charge, although it is somewhat with the exhaust gases. The cycle of events is then repeated, the piston making two strokes for each revolution of the crankshaft.

Port timing diagram for two stroke cycle engine

Port diagram for a two stroke petrol engine is given which is self-explanatory.

P-V diagram for two stroke petrol engine

A figure shows the shape of the p-v diagram for a two stroke petrol engine. This diagram is only for the main cylinder or top side of the piston. 

Two Stroke Compression Ignition (C.I.) Engine

two stroke cycle diesel engine

In this two stroke engine, only air is compressed inside the cylinder & the fuel (diesel) is injected by an injector fitted in the head of the cylinder. There is no spark plug in this engine. The remaining operations of the two stroke compression ignition engine are exactly the same as those of the spark ignition engine.

Port timing diagram for a two stroke diesel engine.

ngcb19
Two stroke diesel engine

The figure shows the cylinder pressures and temperatures acting on spark plug for two strokes and four stroke engines.

# Advantages of Two-Stroke Engine Over Four Stroke:

  1. The two stroke engine gives one working stroke for each revolution of the crankshaft. The four-stroke gives one working stroke for every two revolutions of the crankshaft. Hence, the power developed by two stroke engine is twice that developed by four-stroke engine for the same engine speed and cylinder volume.
  2. The turning moment on the crankshaft is more even in two stroke engine. Due to one working stroke for each revolution of the crankshaft, and so it need a lighter flywheel in it.
  3. For the same power, a two stroke engine is more compact, light and requires less space than a four-stroke engine. Thus it is more suited for auto-cycle, motorcycles and scooters.
  4. A two stroke engine is simpler in construction and mechanism. There is no valve and valve mechanism in it. The ports are easy to design and they are cover and uncover by the movement of the piston itself.
  5. It has high mechanical efficiency due to the absence of cams, crankshaft and rockers, etc., of the valves.
  6. It gives less torsional oscillations.
  7. Two stroke engine requires fewer spare parts due to its simple design.
  8. It can be reversed if it is of valveless type.
  9. There is a saving in work required to overcome the friction of the inlet and exhaust port.

# Disadvantages:

  1. In two stroke cycle Otto engine, the fuel consumption is high. because the fresh charge is likely to be wasted by escaping through the exhaust port.
  2. The actual compression starts when the ports are completely closed by the upward movement of the piston, after a few degree revolutions of the crankshafts. Thus, the actual compression ratio and hence the thermal efficiency of two stroke engine is less than that of the four-stroke for the same dimensions.
  3. The charge is diluted by the burnt gases due to incomplete scavenging.
  4. It gives greater noise.
  5. It consumes more lubricating oil.
  6. There are greater wear and tear of moving parts.

Difference Between Two-Stroke Engine & Four-Stroke Engine

Two Stroke Engine Four Stroke Engine
1. In this one working stroke for each revolution of the crankshaft. 1. In four-stroke engine, one working stroke for every two revolutions of the crankshaft.
2. The turning moment on the crankshaft is more even due to one working stroke for each revolution of the crankshaft. Hence it requires lighter flywheel and the engine runs balanced. 2.The turning moment on the crankshaft is not even due to one working stroke for every two revolution of the crankshaft. hence it requires heavy flywheel and the engine runs unbalanced.
3. Cost of the engine is low. 3. The engine is heavy
4. The engine is light. 4. Cost of the engine is high
5. Mechanical efficiency is more due to less friction in a few parts 5. Less mechanical efficiency due to more friction in many parts of the four stroke engine.
6. The output is low due to the mixing of fresh charge with the burnt gases. 6. The output is more due to full fresh charge intake and full burnt gases exhaust.
7. The engine runs at hot. 7. The engine runs at cold
8. It is air-cooled 8. It is water cooled
9. Fuel consumption is more. 9. Less fuel consumption in the four stroke engine
10. The engine requires less space. 10. The engine requires more space
11. Lubricating system is simple. 11. Lubricating system is complicated
12. The engine produces more noise 12. Noise is less.
13. The engine is used in cars, buses, trucks. 13. The engine is used in cars, buses, trucks.
14.The engine is consists of inlet and exhaust ports. 14. The engine consists of inlet and exhaust valves.
15. Low thermal efficiency. 15. More thermal efficiency.
16. These engines consume more lubricating oil. 16. The engine consumes less lubricating oil.
17. Greater wear and tear of moving parts. 17. Less wear and tear of moving parts in the engine.
Tags: , , , , , , , , ,