admin@mazurekgravity.in

Question-Answer

Question-Answer › Tag: Food engineering
Filter:AllOpenResolvedClosedUnanswered
A single-cylinder rotational viscometer is used to measure a liquid with viscosity of 100cP using a spindle with 6cm length and 1cm radius. At maximum shear rate (rpm 60), the measurements approach a full-scale reading of 100. Determine the spindle dimensions that will allow the viscometer to measure viscosities up to 10,000cP at maximum shear rate.
OpenSumit kumar asked 1 year ago • 
76 views0 answers0 votes
Determine the volume and enthalpy of steam at 120°C with 80% quality
OpenSumit kumar asked 1 year ago • 
68 views0 answers0 votes
Calculate the volume occupied by 5 gram of acetylene gas at 50'C and 740mm Hg pressure
AnsweredSumit Kumar asked 1 year ago • 
108 views1 answers0 votes
A pump is being used to transport a liquid food product (ρ 1000 kg/m 3, μ 1.5cP) from a holding tank to a fi lling machine at a mass fl ow rate of 2 kg/s. The liquid level in the holding tank is 10 m above the pump, and the fi lling machine is 5 m above the pump. There is 100 m of 2-in nominal diameter sanitary pipeline between the holding tank and the fi lling machine, with one open globe valve and four regular 90 fl anged elbows in the system. The product is being pumped through a heat exchanger with 100 kPa of pressure drop due to friction before fi lling. Determine the theoretical power requirement for the pump.
OpenSumit Kumar asked 1 year ago • 
510 views0 answers0 votes
The fl ow of a liquid in a 2-in nominal diameter steel pipe produces a pressure drop due to friction of 78.86 Pa. The length of pipe is 40 m and the mean velocity is 3 m/s. If the density of the liquid is 1000 kg/m 3, then a. Determine the Reynolds number. b. Determine if the fl ow is laminar or turbulent. c. Compute viscosity of the liquid. d. Estimate the temperature, if the liquid is water. e. Compute the mass fl ow rate.
OpenSumit Kumar asked 1 year ago • 
91 views0 answers0 votes
123…6
Ask Question

Question By Categories

For your ease we have categorised questions into their respective subjects. To get free answer post your question using “Ask A Question“

Applied Thermodynamics
Mechanical Engineering
Machine Design
Thermodynamics
Aptitude
Chemistry
Manufacturing/Production
Chemical Engineering
Material and Energy Balance
Mathematics
Chemical Thermodynamics
Strength of Materials
Theory of Machines
Civil Engineering
Physics
Computer Science
Fluid Mechanics
Engineering Mechanics
Measurement & Insturmentation
Electrical Engineering
Heat and Mass Transfer
Solid Mechanics
Modelling and simulation
Economics
Food Technology
IC Engines
Kinematics of Machines
Chemical Reaction Engineering
Page 1 of 6
1 2 3 … 6