A Steel Cantilever Beam Is Welded Using A E6010 Electrode To A Support Beam As Shown Below. Both Beams Are 20mm Thick Steel Rectangular Cross-section Beams With E = 70 GPa, Sy = 200 MPa. A) Determine The Weld Size Needed To Withstand That Static Load F = 1000N. B) What Is The Maximum Bending Stress In The Cantilever Beam?

Question-Answer › Category: Strength of Materials › A steel cantilever beam is welded using a E6010 electrode to a support beam as shown below. Both beams are 20mm thick steel rectangular cross-section beams with E = 70 GPa, Sy = 200 MPa. A) Determine the weld size needed to withstand that static load F = 1000N. b) What is the maximum bending stress in the cantilever beam?

0 Vote Up Vote Down

John asked 4 months ago

A steel cantilever beam is welded using a E6010 electrode to a support beam as shown
below. Both beams are 20mm thick steel rectangular cross-section beams with E = 70
GPa, Sy = 200 MPa. A) Determine the weld size needed to withstand that static load
F = 1000N. b) What is the maximum bending stress in the cantilever beam?

Your Answer

MAZUREK GRAVITY

Related