admin@mazurekgravity.in

A 300 × 150 × 15 mm angle is to be welded to a steel plate by fillet welds as shown in Figure. If the angle is subjected to a static load of 300 kN, find the length of weld at the top and bottom. The allowable shear stress for static loading may be taken as 90 MPa.

Question-Answer › Category: Machine Design › A 300 × 150 × 15 mm angle is to be welded to a steel plate by fillet welds as shown in Figure. If the angle is subjected to a static load of 300 kN, find the length of weld at the top and bottom. The allowable shear stress for static loading may be taken as 90 MPa.
0 Vote Up Vote Down
Mwate Chito asked 6 months ago

A 300 × 150 × 15 mm angle is to be welded to a steel plate by fillet welds as shown in Figure. If the angle is subjected to a static load of 300 kN, find the length of weld at the top and bottom. The allowable shear stress for static loading may be taken as 90 MPa.

1 Answers
0 Vote Up Vote Down
ਸਾਜਿਦ ਅਹਿਮਦ answered 6 months ago

 
 
 

Answer! 300 XLSO X 15 Stafte Parcer- 300 KN Allewable shear e=gorpa -stal plate a goed + DH b 1 15 mm lb E150- length of Bottla = exb atb by = 314.31x 98.94 300 = 100.52 mm - (314-31- 100-S2) 213-79 mm lt Х lo lb tence G lb = 100.52 mm - 213-79mm

Your Answer

3 + 11 =